Drivetrain Questions and info regarding transmissions, clutches, etc.

DIY 03 G35 Coupe 5AT to 07 G35S 5AT differential swap

Thread Tools
 
Search this Thread
 
Rate Thread
 
Old Jun 4, 2010 | 07:52 PM
  #151  
SDGenius's Avatar
Registered User
iTrader: (15)
Joined: Jan 2008
Posts: 12,810
Likes: 911
From: Oside, SoCal
^Enjoy
 
Reply
Old Jun 4, 2010 | 09:38 PM
  #152  
btlegacy's Avatar
Registered User
Joined: May 2010
Posts: 5
Likes: 0
2007+ G35/G37 VLSD (3.692) swap into base 2008 350Z (3.538)

The car we worked on was a 2008 350Z base with and open non-locking rear differential. The goal was to swap in a LSD at a cost conscious price. After doing some research we decided to try on of the newer G35 differentials with VLSD and a gear ratio of 3.692. This gained our solution of a cost effective LSD and as a bonus had a bit better gearing 3.692 versus the 3.538 that came stock.

Our donor differential came from a 2008 Infiniti G35 6MT. You can see a comparison of the two differentials below. As you can see from the picture they have the same case as well as all the same flanges. The only items that needed to be swapped over from the old differential was the ABS sensors as the donor differentials had individual plugs and the old had one merged plug.



After the sensors were swapped over we put in some fresh fluid into the donor differential and bolted it in. We drove it around for a little while just to let the fluid spread inside the diff and let the diff have a little movement. After that the owner let it rip and his impressions are that it is like a completely different car.

We believe this was a worthwhile and cost effective modification using OEM parts.

The donor diff came from a 2008 G35 6MT and interchanges with the vehicles below:

INFINITI G37 2009 Cpe and Sdn, Rr, RWD, locking, MT (3.692 ratio)
INFINITI G37 2008 (RWD, 3.692 ratio), locking, MT
INFINITI G35 2008 (4 Dr, Sdn), Rr, RWD, locking, MT
INFINITI G35 2007 Rr, RWD, 4 Dr (Sdn, 3.692 ratio), locking, MT

The differential from the Auto version can also be used but you will need to move the driveshaft flange from your old differential as the Auto versions use a 3 bolt flange.
 
Reply
Old Jun 5, 2010 | 11:17 AM
  #153  
Tollboothwilley's Avatar
Former G35driver Vendor
iTrader: (32)
Joined: Jan 2008
Posts: 3,684
Likes: 28
From: Vegas
Originally Posted by OCG35
Careful with that - there have been issues in the past with VB from different car not being compatible (even when same year)
The reason for this is the the EEPROM in the TCU is not programmable. It has to be ERASED at the dealer. At first startup after erasing all data will be written to the EEPROM. Issues arise IF you don't erase it. (Per FSM and also experience)

Originally Posted by SDGenius
hmm, if it'll work, how much?
I dunno, PM me. I live in Vegas now, a lot closer so maybe we can do a weekend thing? Takes 4-5 hours and a hell of a lot of paper towels. LOL
 
Reply
Old Jun 5, 2010 | 12:03 PM
  #154  
SDGenius's Avatar
Registered User
iTrader: (15)
Joined: Jan 2008
Posts: 12,810
Likes: 911
From: Oside, SoCal
PM'd
 
Reply
Old Jun 8, 2010 | 12:21 PM
  #155  
Tollboothwilley's Avatar
Former G35driver Vendor
iTrader: (32)
Joined: Jan 2008
Posts: 3,684
Likes: 28
From: Vegas
sent reply
 
Reply
Old Jun 10, 2010 | 09:42 AM
  #156  
CLyons0203's Avatar
Registered User
iTrader: (5)
Joined: Jul 2007
Posts: 471
Likes: 5
I have a 2005 G35 Sedan Auto with VLSD, which diff do I have 3.3 or 3.5?
 
Reply
Old Jun 10, 2010 | 09:46 AM
  #157  
SDGenius's Avatar
Registered User
iTrader: (15)
Joined: Jan 2008
Posts: 12,810
Likes: 911
From: Oside, SoCal
^3.3
 
Reply
Old Jun 10, 2010 | 10:50 AM
  #158  
CLyons0203's Avatar
Registered User
iTrader: (5)
Joined: Jul 2007
Posts: 471
Likes: 5
03-06 RWD 5AT Sedan (open or VLSD) - 3.3 gear
03-07 RWD 5AT coupe (VLSD) - 3.3 gear
04-06 AWD (open) - 3.5 gear
All 6MTs (open or VSLD) - 3.5 gear
 
Reply
Old Jul 12, 2010 | 05:19 PM
  #159  
herrschaft's Avatar
Registered User
iTrader: (18)
Joined: Jul 2009
Posts: 7,739
Likes: 771
From: Coast
I have an 06 5AT and just picked up a G37 pumpkin. Do I still need to modify anything to make it work?
 

Last edited by herrschaft; Jul 12, 2010 at 08:03 PM.
Reply
Old Jul 14, 2010 | 01:00 PM
  #160  
split's Avatar
Registered User
Joined: Feb 2010
Posts: 63
Likes: 0
Question

i have an 05 coupe auto.. i'm assuming i have 3.3 open diff. I want to do a 3.5FD VLSD swap. What's the last car that had the 3.5FD VLSD? 07 6MT?
 
Reply
Old Jul 14, 2010 | 02:13 PM
  #161  
SDGenius's Avatar
Registered User
iTrader: (15)
Joined: Jan 2008
Posts: 12,810
Likes: 911
From: Oside, SoCal
Originally Posted by herrschaft
I have an 06 5AT and just picked up a G37 pumpkin. Do I still need to modify anything to make it work?
is it from an auto or manual???
 
Reply
Old Jul 14, 2010 | 02:13 PM
  #162  
SDGenius's Avatar
Registered User
iTrader: (15)
Joined: Jan 2008
Posts: 12,810
Likes: 911
From: Oside, SoCal
found another 3.7FD diff/complete pumpkin!!! it's for the MT too, so it's a direct swap, no need to switch out flanges or grind anything down(i hadda do that for mine, came off an auto). it's $500 shipped in SoCal, lemme know if anyone wants the guy's number.
 
Reply
Old Jul 14, 2010 | 05:57 PM
  #163  
herrschaft's Avatar
Registered User
iTrader: (18)
Joined: Jul 2009
Posts: 7,739
Likes: 771
From: Coast
Originally Posted by SDGenius
is it from an auto or manual???
Not sure, it has 3 flange bolts and the long pinion shaft. But I just realized that I bought an open diff , so I may pickup another one.
Originally Posted by SDGenius
found another 3.7FD diff/complete pumpkin!!! it's for the MT too, so it's a direct swap, no need to switch out flanges or grind anything down(i hadda do that for mine, came off an auto). it's $500 shipped in SoCal, lemme know if anyone wants the guy's number.
If its a VLSD I might be interested in it, can you PM me his number.
 

Last edited by herrschaft; Jul 14, 2010 at 06:02 PM.
Reply
Old Jul 14, 2010 | 05:58 PM
  #164  
split's Avatar
Registered User
Joined: Feb 2010
Posts: 63
Likes: 0
Question

so if i get a 3.5 vLSD pumpkin i wont lose cruise control?
 
Reply
Old Jul 14, 2010 | 07:42 PM
  #165  
SDGenius's Avatar
Registered User
iTrader: (15)
Joined: Jan 2008
Posts: 12,810
Likes: 911
From: Oside, SoCal
Originally Posted by herrschaft
Not sure, it has 3 flange bolts and the long pinion shaft. But I just realized that I bought an open diff , so I may pickup another one.
If its a VLSD I might be interested in it, can you PM me his number.
uh, just cause it's from an auto doesn't automatically make it an open diff. as long as it was off a sport equipped model then ur good. i'd still take 3.7FD w/an open diff over a 3.3 w/VLSD.
 
Reply


You have already rated this thread Rating: Thread Rating: 0 votes,  average.


All times are GMT -4. The time now is 06:13 PM.