DIY: make your own grounding kit + Install!
#61
#62
#63
Registered User
iTrader: (11)
#64
I guess that's sort of my point... with so many different "opinions" I don't really want to spend $50 on something that may not do anything. So if I were to install one really good ground from the front of the engine to the chassis and then one really good ground from the back of the engine to the chassis with some spare high quality 4 awg wire I already have would this provide at least a similar result as the full 7 wire kit enough for me to see if I notice a difference or not?
#66
The big three upgrade is for ALT POWER, BATTERY GROUND, and ENGINE GROUND.
Engine to Grounding point on car
Battery ground "-" to ground point on car
Battery "+" to Alternator power lead "+" with Fuse inline
Here is what the you can do finalize and ground everything else including transmission for SO CALLED GAINS...
1) ECU ground to grounding point on plenum near cylinder 1 (front of car passenger side)
2) PS ground to grounding point on plenum near cylinder 1 (front of car passenger side)
3) Extension from Front of timing cover to same grounding point cylinder 1 (front of car passenger side)
4) Front of timing cover (same location at #3) to Intake mounting point on plenum. (where stock z/g tube screws into plenum)
5)Intake mounting point on plenum (where stock z/g tube screws into plenum) to brake/clutch grounding point.
6) Intake mounting point to plenum grounding point on cylinder 1 (same as Step #1 & #2) (Not sure if this is necessary )
7) Front timing cover to grounding point cylinder 1 front of engine near sensor / coolant hose.
8) Grounding point to transmission
9) Intake mounting point on plenum to grounding point around driver headlight grounding point.
10) Throttle body to grounding point in battery compartment
https://g35driver.com/forums/g35-cou...ml#post5992222
https://g35driver.com/forums/g35-sed...nce-parts.html
https://g35driver.com/forums/g-spot/...-asap-pls.html
https://g35driver.com/forums/engine-...tallation.html
https://g35driver.com/forums/g35-sed...ml#post5996257
Engine to Grounding point on car
Battery ground "-" to ground point on car
Battery "+" to Alternator power lead "+" with Fuse inline
Here is what the you can do finalize and ground everything else including transmission for SO CALLED GAINS...
1) ECU ground to grounding point on plenum near cylinder 1 (front of car passenger side)
2) PS ground to grounding point on plenum near cylinder 1 (front of car passenger side)
3) Extension from Front of timing cover to same grounding point cylinder 1 (front of car passenger side)
4) Front of timing cover (same location at #3) to Intake mounting point on plenum. (where stock z/g tube screws into plenum)
5)Intake mounting point on plenum (where stock z/g tube screws into plenum) to brake/clutch grounding point.
6) Intake mounting point to plenum grounding point on cylinder 1 (same as Step #1 & #2) (Not sure if this is necessary )
7) Front timing cover to grounding point cylinder 1 front of engine near sensor / coolant hose.
8) Grounding point to transmission
9) Intake mounting point on plenum to grounding point around driver headlight grounding point.
10) Throttle body to grounding point in battery compartment
https://g35driver.com/forums/g35-cou...ml#post5992222
https://g35driver.com/forums/g35-sed...nce-parts.html
https://g35driver.com/forums/g-spot/...-asap-pls.html
https://g35driver.com/forums/engine-...tallation.html
https://g35driver.com/forums/g35-sed...ml#post5996257
The following 3 users liked this post by faiz23:
#67
You don't 4GA wire for grounds it's overkill. I have an 06G35X and heres how to DIY, 8GA car audio ground wire. Lets start with the batt. albums/o520/ilovemyG/P1000181.jpg[/IMG] The batt+ cables are 4GA and are now soldered as is are the 4 main 10GA power wires also soldered. This is factory batt cable soldered P1000185.jpg[/IMG] This is other end of batt ground cablt soldered into my wiring system. This is main wiring fot headlights, fans on passenger side. This is wiring on block from batt ground. This is all 6 coil pack and 2 trasmission grounds. Grounds across front of engine. Grounds for all drivers side IPDM stuff headlights fans other. Will post more as it happens. when you takr this peice off the stock airbox you have an 4" hole same as stillen pop charger at a cost of $$$$$$$ and you can snap it back on for the winter sue me for being smart!!!!!!! will no longer post to ingrates 06G35X runs perfect no mods.
Last edited by wiredG35; 05-17-2012 at 12:31 AM. Reason: more pics and verbage
#70
Registered User
iTrader: (11)
The following users liked this post:
That G Gray (04-02-2013)
#72
Registered User
iTrader: (11)
#73
You don't 4GA wire for grounds it's overkill. I have an 06G35X and heres how to DIY, 8GA car audio ground wire. Lets start with the batt. albums/o520/ilovemyG/P1000181.jpg[/IMG] The batt+ cables are 4GA and are now soldered as is are the 4 main 10GA power wires also soldered. This is factory batt cable soldered P1000185.jpg[/IMG] This is other end of batt ground cablt soldered into my wiring system. This is main wiring fot headlights, fans on passenger side. This is wiring on block from batt ground. This is all 6 coil pack and 2 trasmission grounds. Grounds across front of engine. Grounds for all drivers side IPDM stuff headlights fans other. Will post more as it happens. when you takr this peice off the stock airbox you have an 4" hole same as stillen pop charger at a cost of $$$$$$$ and you can snap it back on for the winter sue me for being smart!!!!!!! will no longer post to ingrates 06G35X runs perfect no mods.
Thread
Thread Starter
Forum
Replies
Last Post
joedaddy1
Engine, Drivetrain & Forced-Induction
0
07-28-2015 02:58 PM