2005 6MT Coupes.. +18wHP +22/29wTQ!? - A Thanks To Tony, Motordyne Engineering
#181
Join Date: Feb 2004
Location: South
Posts: 3,671
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by nbp78415
will the engine cover still fit after this mod? thats one reason im trying to stay away from the plenums. i think the engine cover looks so damn good =)
#183
in response to the uy who talked about launching a viper........
I find the 300 HP G to be harder to launch than my 600 hp supercharged cobra. The reason being wheel hop and a lack of low end power in the G. For me, it is much easier to modulate too much power than to deal with a soggy bottom end and a hopping axle.
I find the 300 HP G to be harder to launch than my 600 hp supercharged cobra. The reason being wheel hop and a lack of low end power in the G. For me, it is much easier to modulate too much power than to deal with a soggy bottom end and a hopping axle.
#187
Originally Posted by Repsol
You said that 15hp was the lowest gain that you saw, what was the lowest gain in Torque that you saw, or at least the average gain?
The general shape of the modified curve is always the same. Decrease above 6.5K and a large gain below 6.5K with significant gains all the way down to about 3.5K.
Its a hell of a lot more streetable.
#189
Originally Posted by VQ35sleeper
i'm interested if this mod will coincide well with any sort of F/I
Might work even work better with the Vortech type FI system because they are generally low in TQ.
This will go a long way in helping the TQ.
#190
Originally Posted by Repsol
So what are we looking at? Around 20 to 25lbs of Torque increase under 6.5k?? Please say yes!!!
Pre and Post ECU resets, same car, same day, same dyno, same tank of gas, same ambient temps, same coolant temps. Same everything.
Installed it on the dyno.
#191
Originally Posted by BocaCoupe
My vote is: MREV
(p.s. i want a discount if u use it)![Big Grin](https://g35driver.com/forums/images/smilies/biggrin.gif)
(p.s. i want a discount if u use it)
![Big Grin](https://g35driver.com/forums/images/smilies/biggrin.gif)
I'll go with yours. It doesn't appear to mean anything special. Its just simple and doesn't need explanation. If it gets too deep some may not know what it means. Its probably better to KISS.
I'll hook you up! LMK when.
Tony
PS Can you guys LMK what you think of the attached example of the new website. What are your thoughts?
I need to make a better looking website. Hopefully this one will be done soon.
#192
Registered User
iTrader: (4)
Join Date: Apr 2004
Location: San Diego
Posts: 285
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Hydrazine
PS Can you guys LMK what you think of the attached example of the new website. What are your thoughts?
I need to make a better looking website. Hopefully this one will be done soon.
I need to make a better looking website. Hopefully this one will be done soon.
![Smilie](https://g35driver.com/forums/images/smilies/smile.gif)
However, on the headline phrase, ... I believe it should be worded, "The latest evolution of Motordyne Engineering's plenum spacers are here ..."
![Smilie](https://g35driver.com/forums/images/smilies/smile.gif)
![Stick Out Tongue](https://g35driver.com/forums/images/smilies/tongue.gif)
... but I like the website design.
![Smilie](https://g35driver.com/forums/images/smilies/smile.gif)
Last edited by NoLimit; 10-17-2005 at 01:36 AM.
#195