Random Little Question Thread
#2600
Factory sub only put's out minimal bass even when turned up as high as it gose, All the speakers work but there is minimal bass? is it the AMP? I have a aftermarket AMP at my house that I do not use anymore can I switch the factory AMP with the aftermarket one to get some bass back without switching all the speakers and getting a head unit and aftermarket subwoofer?
#2602
Depends what you consider big. But the difference is that the v2's have built in extended studs. v1's have extended studs where you'd have to take out the current ones and replace with the longer ones that come with the v1's.
#2609
Registered User
iTrader: (85)
SPC will allow you to dial in more positive camber (via the shim kit it comes with) over Ichiba...but, SPC is not recommended for aggressively lowered (2+ inches) cars as the A-arms have been known to knock.
So it really depends on how low you go and whether you want to try and get as close to OEM spec as possible.
Another option are the SPL arms which IIRC, will give you more positive camber correction than ichiba..but, stay away from the version 1 of those arms as they too were known to have a knocking issue on aggressively lowered cars.
So it really depends on how low you go and whether you want to try and get as close to OEM spec as possible.
Another option are the SPL arms which IIRC, will give you more positive camber correction than ichiba..but, stay away from the version 1 of those arms as they too were known to have a knocking issue on aggressively lowered cars.
#2610