No it doesn't. You're just moving the positing of the wheel further out, not the angle or the direction it faces.

 

Thanks, now I can go ahead and install the spacers

 

The kind with two turbos on it, LOL! But yeah, z-tube adds nice sound, I like my Stillen cold air intake. I think it's been proven that the stock system is difficult to improve upon; most people add intake parts just for sound.

 

Looking for a DIY on my front end links that connect to the lower control arm can't seem to find one

Is this easy?
Anyone have a part number (03 RWD sedan)? Thanks

 

Do the 370Z dual piston calipers fit the earlier G/Z ?

 

Dunno for sure but I doubt it

 

My question is I have a 2006 5AT bone stock and after I drive it like 20 min or so when I hit the gas pedal I can hear a tsk sound and it sounds like it's coming from the back. If it's on manual mode I can hear it on first an second gear. The car is running perfectly no problems at all it's just that tsk sound right when u hit the gas from a dead stop is this normal??

 

They're going to be the same as the Akebonos. The rear will bolt up the front will need a custom bracket.

Do 350z sways fit the sedan?

 

Bummer. I was afraid of that.
I'm guessing the brackets are expensive enough that it's not worth it

 

Brackets are like $250

Do you know the answer to my question? lol

 

^ Yes:

 

To change the engine belts do you have to take off one belt to change the other?

 

^You have to take the accessory belt off to change the A/C belt.

If you're not changing the A/C belt, you only have to mess with one.

 

Thanks ash (ill click the thanks button when I'm on my lap top lol)

 

Anyone need a vlsd?

https://g35driver.com/forums/drivetr...d-bushing.html