ok ive searched and searched...
#1
ok ive searched and searched...
and i havn't found a thread that answers my question.
I've been reading about the coupe mid pipe swap and have seen pictures of this.
My question is though, would it be possible to just weld flanges onto a straight pipe (no bends) and have it run from the y-pipe flange directly to the OEM axle back flange? It seems pretty straight to me from only looking at it underneath the car. I plan on pulling that section out to tomorrow anyways but knowing what im in for would be better.
Also this is my first post so ill post my car.
2004 6mt just broke 100k.
Thanks for the advice.
I've been reading about the coupe mid pipe swap and have seen pictures of this.
My question is though, would it be possible to just weld flanges onto a straight pipe (no bends) and have it run from the y-pipe flange directly to the OEM axle back flange? It seems pretty straight to me from only looking at it underneath the car. I plan on pulling that section out to tomorrow anyways but knowing what im in for would be better.
Also this is my first post so ill post my car.
2004 6mt just broke 100k.
Thanks for the advice.
#3
You can do anything that floats your boat as long as you have $$$$$. Keep in mind you might get a ton of rasp or drone since you do not have a resonator what so ever except the rear can. If I am not mistaken the 2003-2004 have a smaller muffler so it tends to be louder now imagine how loud it would be with a straight pipe to the muffler. Have you seen what a 2003 midpipe looks in comparison to a 2005 midpipe and what a coupe midpipe looks like. If you remove the resonator completely please carry some earbuds for your passengers.
#5
#7
Trending Topics
#10
What you're talking about is a resonator delete. imo its too raspy. You should try taking the muffler off and see how you like it..its a good, easy DIY. That's what i did and actually love it. It just deepens the tone of the exhaust, doesn't make it raspy. And with the stock 04/03 mid pipe (which is HUGE) it won't be too drone-y!
#11
#13
#14
Thread
Thread Starter
Forum
Replies
Last Post
Visionnn
Buying, Selling & Leasing Discussion
17
10-03-2015 05:16 AM
Learned Hand
G35 Sedan V35 2003-06
1
10-01-2015 09:02 AM