Whenever i switch it to manumatic mode it jit�s stays in the gear it was in and won�t upshift when i press it down or downshift when i press the shifter up any reason why this would happen?

 

Theres a microswitch in the shifter assembly that gets pressed when u move the shifter into manumatic mode. Make sure that switch is working.

 

The vehicle recognizes the switch from normal drive to manumatic, i just can�t upshhift or downshift it just stays in the gear that it was in when it was in normal drive

 

It happens

https://g35driver.com/forums/v36-eng...k-d-again.html

 

I would make sure the microswitches for the up shift and down shift switches are working also. If those are good, then the issue is probably in your gauge cluster. Yes�.it has control over the manumatic!

I am in the middle of repairing mine and I think I may have finally fixed it. Just need a few more days of testing before I can celebrate.

 

Mine had the same issue. Youtube it there is a ignition on off in combination with opening and shutting drivers side door that will fix your problem

 

do you hear the clicks when you move the lever? i assume you don't have paddles to test if the up/down shifts work that way. taking the assembly off and swapping a new one is not a big deal. can probably find one on ebay for under $50 (just make sure it's a sedan/coupe specific one).

 

Can you please guide me through how to fix it or send a link, thanks!

 

Moderator EDIT: Banned for botting