The G-Spot General discussion about the G Series;
G35 & G37, Coupes & Sedans

What did you do to the G today?

Thread Tools
 
Search this Thread
 
Rating: Thread Rating: 2 votes, 5.00 average.
 
Old Oct 14, 2017 | 10:48 PM
  #7771  
Edgarc6789's Avatar
Registered User
Joined: Nov 2016
Posts: 754
Likes: 40
From: La
Originally Posted by sanitarium0114
New grill, deoxodized the headlights, touched up some rock chips
Sized up some old car audio gear.. Aint gonna fit lol.

I don't think you'll even be able to get 3cubicfeet out of the trunk even using the spare tire well lol
 
Reply
Old Oct 15, 2017 | 01:01 AM
  #7772  
sanitarium0114's Avatar
Registered User
Joined: Sep 2017
Posts: 24
Likes: 1
Originally Posted by Edgarc6789
I don't think you'll even be able to get 3cubicfeet out of the trunk even using the spare tire well lol
i took some measurements after those pictures and did some figuring. I can fit about 1.66 cubes, after displacements from a useable port size and tuning, on top of he carpet against the seat and flush with the trunk opening... No idea if that can fit through the opening though. 28x17x10.75 outside dimensions. Basicly enough for one good 12 ported if the mounting depth from top mount is under 10 inches.
 
Reply
Old Oct 15, 2017 | 09:29 AM
  #7773  
FreshLikeAG's Avatar
Registered User
Joined: Jun 2013
Posts: 829
Likes: 99
From: Tampa, Fl
I'm always worried too much bass will wiggle things loose like screws, especially in the sunroof glass. I had a jeep with two 15's and the previous owner blew out his sunroof once and back window twice. You'd think he would learn after the first time but after the third I guess he decided to sell them to me. Most my money is in the door speakers so I hate to cancel out the music with too much bass. There's too much rattle without any music anyway!
 
Reply
Old Oct 15, 2017 | 01:23 PM
  #7774  
Edgarc6789's Avatar
Registered User
Joined: Nov 2016
Posts: 754
Likes: 40
From: La
Originally Posted by sanitarium0114
i took some measurements after those pictures and did some figuring. I can fit about 1.66 cubes, after displacements from a useable port size and tuning, on top of he carpet against the seat and flush with the trunk opening... No idea if that can fit through the opening though. 28x17x10.75 outside dimensions. Basicly enough for one good 12 ported if the mounting depth from top mount is under 10 inches.
A 10 or 12 I'll believe it but that 18" sub lol
 
Reply
Old Oct 15, 2017 | 03:02 PM
  #7775  
joeb1983's Avatar
Registered User
iTrader: (3)
Joined: Sep 2011
Posts: 424
Likes: 43
From: Oklahoma
G35
Final coat of satin before the matte clear.
 
Attached Thumbnails What did you do to the G today?-b0120502-5388-43be-b193-b7a3f2f871f6.jpeg   What did you do to the G today?-241bdb78-68a5-49f9-be8c-724581b19432.jpeg  
Reply
Old Oct 15, 2017 | 10:22 PM
  #7776  
BradMD_96's Avatar
Registered User
Joined: Sep 2015
Posts: 700
Likes: 39
From: Florida, Orlando/Melbourne
Swapped in a pair of LED headlights (H4) to replace the fog/highs
I know the yellow is preferable for fog and rain but I'm rarely ever in those weather conditions
These are definitely brighter than the halogens. With the halogens I could hardly tell when the fogs were on and the highs were not all that much better either.

I have a few more different sets on their way, with varying price tags, that I'll be trying out soon between my G our other cars. I was pretty impressed with these (being the cheapest with Chip on Board) so I'm intrigued to see the output on the sets with CREE and Osram chips.

Hard to capture the lighting on my phone camera, but here's an idea
https://www.youtube.com/watch?v=3d4e...ature=youtu.be


Edit: forgot the beam patterns - These being COB the cut off is not as precise as the single CREE or Osram chips would be, but still not too bad. Tested from a distance sitting in another car and there's no glare or dazzling.
HID, Fog, Highs
 

Last edited by BradMD_96; Oct 16, 2017 at 10:28 AM.
Reply
Old Oct 16, 2017 | 06:18 AM
  #7777  
Urbanengineer's Avatar
Super Moderator
10 Year Member
Liked
Community Favorite
iTrader: (3)
Joined: Jun 2013
Posts: 11,174
Likes: 1,044
From: OH-IO
Premier Member

:facepalm:

LEDs do not belong in headlights (besides auxiliary bulbs).

LEDs do not belong in headlights (besides auxiliary bulbs).

LEDs do not belong in headlights (besides auxiliary bulbs).

Did you learn anything today Bart?
 
Reply
Old Oct 16, 2017 | 11:30 AM
  #7778  
MikeG35Coupe's Avatar
Registered User
20 Year Member
Liked
Loved
Community Favorite
iTrader: (2)
Joined: Dec 2003
Posts: 677
Likes: 89
From: Rhode Island
One owner 2004 G35 Coupe 6MT
Originally Posted by EPiK
That is an awesome color Edgar!

Today I had an appt in Charleston that I turned into a proper roadtrip and hung out with a buddy.

Bonus points to the first one to ID the wheels on the Porsche.

Oh and BTW on a 40 roll I destroyed that 997. (On a hwy deep in Mexico....we were the only ones around)
The wheels are from a 996, possibly even that 996.2 in the picture. I suppose it could be a .1 as well that had the lights (and bumpers?) swapped over. It's not a 997 though.
 
Reply
Old Oct 16, 2017 | 02:50 PM
  #7779  
BradMD_96's Avatar
Registered User
Joined: Sep 2015
Posts: 700
Likes: 39
From: Florida, Orlando/Melbourne
Originally Posted by Urbanengineer
:facepalm:

LEDs do not belong in headlights (besides auxiliary bulbs).

LEDs do not belong in headlights (besides auxiliary bulbs).

LEDs do not belong in headlights (besides auxiliary bulbs).

Did you learn anything today Bart?
........whyy

A lot of manufacturers actually have LED headlights now as OEM, although yes, they are different with specialised lenses etc. But.... there are major automotive lighting brands like Philips who make LED headlight bulbs to replace halogen, companies like Philips wouldn't invest into these if they didn't belong in headlights.
 
Reply
Old Oct 16, 2017 | 04:01 PM
  #7780  
cleric670's Avatar
BANNED!!!
Joined: May 2017
Posts: 14,837
Likes: 2,497
From: Washington State
Coupe 6MT Premium RAS
Premier Member

If the entire assembly is engineered around the lamp then YES they belong. Swapping lamps from one type to another is just a recipe for disaster though reflection, refraction issues happen, heat dispersion, current draw (or lack of), etc.
 
Reply
Old Oct 16, 2017 | 04:27 PM
  #7781  
EPiK's Avatar
Registered User
iTrader: (7)
Joined: Oct 2015
Posts: 703
Likes: 53
Originally Posted by MikeG35Coupe
The wheels are from a 996, possibly even that 996.2 in the picture. I suppose it could be a .1 as well that had the lights (and bumpers?) swapped over. It's not a 997 though.
You are correct I'm sure on the model of 911, my head spins on all the later cars .1, .2 versions. .etc. For me it's 964 or nah

Except the GT2s and. GT3s

I was referring to the not stock wheels on the 911..and yes he did swap the rear bumper, don't know about anything else, other than muffler delete and intake on that car.
 
Reply
Old Oct 16, 2017 | 05:56 PM
  #7782  
G2B35AGN's Avatar
Registered User
10 Year Member
Liked
Loved
Community Favorite
iTrader: (10)
Joined: Mar 2013
Posts: 1,990
Likes: 390
From: Raleigh, NC
Coupe, Premium package, sport suspension
Originally Posted by EPiK
You are correct I'm sure on the model of 911, my head spins on all the later cars .1, .2 versions. .etc. For me it's 964 or nah

Except the GT2s and. GT3s

I was referring to the not stock wheels on the 911..and yes he did swap the rear bumper, don't know about anything else, other than muffler delete and intake on that car.
Man o man...you can't start a contest and not know the answer! Negative points!!
 
Reply
Old Oct 16, 2017 | 06:11 PM
  #7783  
EPiK's Avatar
Registered User
iTrader: (7)
Joined: Oct 2015
Posts: 703
Likes: 53
I'm referring to the not stock by any means wheels on the 911 in the picture.
 
Reply
Old Oct 16, 2017 | 08:14 PM
  #7784  
Urbanengineer's Avatar
Super Moderator
10 Year Member
Liked
Community Favorite
iTrader: (3)
Joined: Jun 2013
Posts: 11,174
Likes: 1,044
From: OH-IO
Premier Member

Originally Posted by BradMD_96
........whyy

A lot of manufacturers actually have LED headlights now as OEM, although yes, they are different with specialised lenses etc. But.... there are major automotive lighting brands like Philips who make LED headlight bulbs to replace halogen, companies like Philips wouldn't invest into these if they didn't belong in headlights.
Read his reply above.

Ever heard of the customer is always right? Companies make stuff that sells.

Led assemblies from new cars use Chips designed for that projector or in very rare cases reflector. You can’t remove it from that headlight without bringing the whole assembly to a new headlight.

Led drop in bulbs don’t work in halogen housings like HID don’t either because they are designed completely different for output.

Just don’t drive with your fogs on because they blind everyone. You would fail an inspection if you had one in your county.
 
Reply
Old Oct 18, 2017 | 06:02 PM
  #7785  
MikeG35Coupe's Avatar
Registered User
20 Year Member
Liked
Loved
Community Favorite
iTrader: (2)
Joined: Dec 2003
Posts: 677
Likes: 89
From: Rhode Island
One owner 2004 G35 Coupe 6MT
Finally scored a brand spanking new 4-piece set of OEM floor mats!





Anyone want to buy my old ones?
 
Reply


You have already rated this thread Rating: Thread Rating: 2 votes, 5.00 average.


All times are GMT -4. The time now is 09:40 AM.