I'm currently riding on 245/45/18 and 225/50/18, and I'm in need for new tires soon. Is it OK for all 4 of my new tires to be 245/45/18 for the sake of rotating? or do i have have to continue using different size tires? What difference would it make? thanks!

 

285/30 on a 19x13.

lmao

 

Those your new wheels?

 

Haha doesn't look like that will work

 

What's going on fellas. a buddy of mine is selling his wheels and I wanted to get your feedback with the sizes.
20x9.5" +20 Front with a 67.1 Hub Bore
20x11" +20 Rear with a 67.1 Hub Bore. They came off a genesis.
Not lowered yet, looking at coilovers and rolling and prob pulling as well.
07 coupe

thx

 

It'll fit if that's what you're concerned about

 

pretty much. thx for quick response

 

You won't need a pull...just a flat roll that's all

 

I recently bought some wheels and confused the offsets listed somehow. I ended up with 19x9.5 +16 in the front and 19x11-19 in the rear. The fronts look okay and i have some spacers that i can throw on. What kind of work will i need for the rears? I rolled and pulled my fenders and ordered a spc kit. What else will i need to do to get this looking correct lol. Any advice is appreciated..thanks.

 

You already rolled and pulled? Should have waited until after you fitted the wheels man...your doing it backwards

 

I hear 11 +0 Can be done really easily without any pulling and minor camber.

Since you have a pull and have arms, you should be able to fit it no problem with the right amount of camber and stretch. 245/35 on the 11?

 

He's gonna need like a 30mm spacer for the fronts to match the rears...

 

Not if you push the front fenders in.

Pushing is the new pulling.

 

Yea well i fitted the wheels for the fender work but havnt done the camber kit yet.. Thats tomorrow... Right now they have 225 /35 in the front and 245/11 in the back

 

245/11??? Hmmm never heard of that size


But yes I agree you should an attempt a front fender push