Wheels & Tires Grabbing the road and stopping.

Have a Question/s About Wheels/Tires/Offsets/Camber/Etc? Ask here::

Thread Tools
 
Search this Thread
 
Rating: Thread Rating: 3 votes, 3.67 average.
 
  #2161  
Old 06-10-2011 | 05:44 PM
4D05G35's Avatar
Registered User
iTrader: (6)
Joined: Dec 2009
Posts: 1,651
Likes: 50
From: WA
^ thats if you run the 255/35 up front. With a 245/35 or narrower you shouldnt have to.
 
  #2162  
Old 06-10-2011 | 06:23 PM
DGP-G35's Avatar
Registered User
Joined: Dec 2010
Posts: 261
Likes: 7
From: Pacific NW
Thank you 4D05G35, much appreciated.

Hopefully at stock height it will not rub at all (not even the liners over big bumps).

Jason
 
  #2163  
Old 06-10-2011 | 07:27 PM
4D05G35's Avatar
Registered User
iTrader: (6)
Joined: Dec 2009
Posts: 1,651
Likes: 50
From: WA
You're welcome. Glad to help.
 
  #2164  
Old 06-10-2011 | 07:49 PM
Will_Ireally_AM's Avatar
Registered User
iTrader: (1)
Joined: May 2011
Posts: 94
Likes: 2
From: GA
Smile

Will I rub with 20x9 +18 20x10.5+20 with tein G stechs I have 245/30 and 275/30
 
  #2165  
Old 06-10-2011 | 08:46 PM
Calamity's Avatar
Registered User
iTrader: (2)
Joined: Mar 2011
Posts: 477
Likes: 15
From: South Jersey
So I came in here to double check.

Getting AvantGarde M310s, i think im going with 19x9.5 +22 all around with 245/35/19 front and 275/35/19 rear. I shouldnt have any problems, but will this setup look awkward without being staggered? im currently at stock height. also was thinking that if it does, i could just get a spacer for the rear.

could also possibly get a 19x11 rear but some say ittl rub, some dont. i think that may be a bit wide too.
 
  #2166  
Old 06-10-2011 | 08:49 PM
4D05G35's Avatar
Registered User
iTrader: (6)
Joined: Dec 2009
Posts: 1,651
Likes: 50
From: WA
Originally Posted by Will_Ireally_AM
Will I rub with 20x9 +18 20x10.5+20 with tein G stechs I have 245/30 and 275/30
The front you are fine. The rear might need a slight rolling of the fender.
 
  #2167  
Old 06-11-2011 | 07:30 AM
Gsedan6mt's Avatar
Registered User
iTrader: (1)
Joined: Aug 2009
Posts: 59
Likes: 0
I have an 06 sedan rwd with rolled rear fenders, Just wondering if someone can tell me if 19x9.5 +40 would work for me all the way around. Also what size tire would you run if it does work? thanks
 
  #2168  
Old 06-11-2011 | 07:36 AM
Will_Ireally_AM's Avatar
Registered User
iTrader: (1)
Joined: May 2011
Posts: 94
Likes: 2
From: GA
Fender rolling in Ga

Does anybody roll fenders in the kennsaw or marrieta area? Becuz this shop I went to they dot know what rolling the fenders mean lol
 
  #2169  
Old 06-11-2011 | 02:17 PM
4D05G35's Avatar
Registered User
iTrader: (6)
Joined: Dec 2009
Posts: 1,651
Likes: 50
From: WA
Originally Posted by Gsedan6mt
I have an 06 sedan rwd with rolled rear fenders, Just wondering if someone can tell me if 19x9.5 +40 would work for me all the way around. Also what size tire would you run if it does work? thanks
Yes you will clear no problem. 255/35/19 or 245/40/19. Is the car lowered?
If the car is lowered a bit you could even run a 245/35/19, but IMO at stock height those tires look to small.
 
  #2170  
Old 06-11-2011 | 04:21 PM
Gsedan6mt's Avatar
Registered User
iTrader: (1)
Joined: Aug 2009
Posts: 59
Likes: 0
thanks for the info, im on a g/z drop right now. so u think a 245 40 19 is ok?
 
  #2171  
Old 06-11-2011 | 04:27 PM
4D05G35's Avatar
Registered User
iTrader: (6)
Joined: Dec 2009
Posts: 1,651
Likes: 50
From: WA
The 245/40 is slightly larger than stock(26.7"), but you will be fine. What size of wheels/tires do you have now?
 
  #2172  
Old 06-11-2011 | 04:39 PM
Gsedan6mt's Avatar
Registered User
iTrader: (1)
Joined: Aug 2009
Posts: 59
Likes: 0
23545r18 stock sport wheels and tires
 
  #2173  
Old 06-11-2011 | 05:41 PM
4D05G35's Avatar
Registered User
iTrader: (6)
Joined: Dec 2009
Posts: 1,651
Likes: 50
From: WA
This is on an 18" wheel, but the width and tire is the same.
http://www.tyrestretch.com/9.5_245_4...40_R18.jpg.php

the 245/40 will be a very minor stretch so you might want to run a small spacer to bring them a little more flush. With the fender rolled and the 245 you could probably run up to a 10mm spacer.

Here is a 255/35, but once again in an 18. The sidewall height and stretch will be the same.
http://www.tyrestretch.com/9.5_255_3..._R18_2.jpg.php

I ran 255/35/19's with a 19x9.5 + 40 on my car in the past. The set-up cleared just fine without needing the fender rolled.
Have you purchased these wheels yet?
 
  #2174  
Old 06-11-2011 | 06:16 PM
Gsedan6mt's Avatar
Registered User
iTrader: (1)
Joined: Aug 2009
Posts: 59
Likes: 0
havnt purchased wheels yet, just checking fitment
 
  #2175  
Old 06-11-2011 | 06:33 PM
4D05G35's Avatar
Registered User
iTrader: (6)
Joined: Dec 2009
Posts: 1,651
Likes: 50
From: WA
ah ok. gotcha.
 


You have already rated this thread Rating: Thread Rating: 3 votes, 3.67 average.


All times are GMT -4. The time now is 01:57 PM.