Have a Question/s About Wheels/Tires/Offsets/Camber/Etc? Ask here::
I want to put a set of 19"OEM RAYS from a g35 coupe on my 2003 5ATG35 SEDAN. I am not sure about the specifications of my car as is, but it came with a set of 17" 6 Spoke wheels.
Will I have to do any modifications to make these wheels fit?
Will I have to do any modifications to make these wheels fit?
Registered User
Joined: Oct 2011
Posts: 38
Likes: 2
From: 757
It'll fit without a doubt.
Registered User
Joined: Oct 2011
Posts: 38
Likes: 2
From: 757
03 coupe. If I run 18x10.5 +10 about 1.5 -2inch drop coilovers. What tire sizes should I be running and how much camber if possible. Not trying to be layd out on the ground its daily driven and has occasional road hazards. thanks in advance for any help
Last edited by o3LRG; Feb 1, 2012 at 07:38 AM. Reason: offset
I have a 2004 infiniti g35 coupe (no brembo) and I wanna put staggered 22" wheels on it ...(22 x 8.5 on front and 22 x 10 on back) or even wider if possible but I don't want any modifications done to my car and I don't want my wheels/tires to stick out past the fenders..I want a flushed look between the fenders and the tires...I also want the deep lip effect of the wheel, so I'm kinda lost as far as knowing what offset to ask for when I order them. Any suggestions? And yes I wanna keep the size 22" in mind because I already have 20" on the car right now...thanks for ur incoming suggestions
Are you running this all the way around? The front is going to look goofy compared to the rear. The rears will clear with the natural camber from the drop and a roll. Run a 275/35
You'll be fine at stock height, eventually you'll want spacers as wells.
Run the stock sizes 225/45 245/40 or either of those all the way around.
Cool, thanks
Just ordered a set
Just ordered a set
No offsets, I can't help you.
Dave, you'll be fine with this set up.
You don't NEED camber for this set up.
Are you running this all the way around? The front is going to look goofy compared to the rear. The rears will clear with the natural camber from the drop and a roll. Run a 275/35
Never even heard of that brand my man.
You'll be fine at stock height, eventually you'll want spacers as wells.
Run the stock sizes 225/45 245/40 or either of those all the way around.
Dave, you'll be fine with this set up.
You don't NEED camber for this set up.
Are you running this all the way around? The front is going to look goofy compared to the rear. The rears will clear with the natural camber from the drop and a roll. Run a 275/35
Never even heard of that brand my man.
You'll be fine at stock height, eventually you'll want spacers as wells.
Run the stock sizes 225/45 245/40 or either of those all the way around.
Wheels: 20x9.5 +3 and 20x11 +3
Drop: on coils about 2-2.5"
Tires: what size?
I was hoping I could run 245/30/20 and 275/30/20, but I'm afraid I'll rub like cray... Do I need to go down to 225/255 or 235/265?
Drop: on coils about 2-2.5"
Tires: what size?
I was hoping I could run 245/30/20 and 275/30/20, but I'm afraid I'll rub like cray... Do I need to go down to 225/255 or 235/265?
Registered User
Joined: Sep 2011
Posts: 38
Likes: 0
From: Quebec, Ca
I am planning on buying 19'' varrstoen 4.4.2 but I am not sure what will be needed in order to fit these wheels on my 04 coupe. I have never seen these wheels on a g35, only on a genesis.
Front size 19 x 9,5 offset + 12
Rear size 19 x 10,5 offset + 12
There is also possibility of having these with a +22 offset front+rear. What do you guys think would be better offset, +12 or +22 ?
Tires will be Nexen N3000 245/35/19 Front and 275/30/19 Rear.
I'd rather not have comments about how Varrstoen's are replicas and this and that, I just don't have 4000$ to have work varianza's....
I have been told also that camber ajustment will be needed for these ??
HELP ME OUT PLEASE !!
Front size 19 x 9,5 offset + 12
Rear size 19 x 10,5 offset + 12
There is also possibility of having these with a +22 offset front+rear. What do you guys think would be better offset, +12 or +22 ?
Tires will be Nexen N3000 245/35/19 Front and 275/30/19 Rear.
I'd rather not have comments about how Varrstoen's are replicas and this and that, I just don't have 4000$ to have work varianza's....
I have been told also that camber ajustment will be needed for these ??
HELP ME OUT PLEASE !!
^There is a member selling no name spacers. I believe his user name is kday. Look him up. I think he sells them for 60-80 a pair. They look legit too. No personal experience but I know people on the forum have purchased from him.