I do want poke, so a light stretch would be a good option, Thinking 265/35/18? And what size spacers?

 

I have a g35x 2005. If I buy New wheels 20x9 +35 offset will they work on my car?

 

I got a set of coupe oem 19s for my 05 sedan, the tire specs are:

front:
Size: 19x8.0
Offset: +30mm
225/40ZR/19

rear
Size: 19x8.5
Offset: +33mm
245/40ZR/19

I'm going to lower the car with coilovers enough to close the fender/tire gap. i already have rear camber kit only.

my questions:
1. Do i have to get a camber kit for the front?
2. Do i need to roll rear fenders?

 

1. You usually won't need the front camber kit but I recommend
it...

2. You won't need to roll fenders unless you get thicker tires.

 

I am looking at getting a set of rims and tires for a great deal if they will work on my car. The rims are on a 350z so I am sure the wheels will be fine but I am concenred about the tires.

They are Nitto nt555. Extreme ZR...

Front... 245...35...ZR20... 95w
Back... 275...35...ZR20... 102w

Rims r staggered... Front, 20x8..5 back 20x10

Will this work on a 2003 G35 sedan? I am concenred the rear tire is too big :/

 

Advan T7 Gold
18x9 +22 245/40/18 F
18x10 +15 275/40/18 R

 

4DGS, just to double check.

I'm pretty sure I can, but can I stretch a 245/35/20 on a 20x10 rim? My 255/30/20 are done and I have some really good tread left on some 245/35/20s that I have laying around..Thanks again!

 

you can stretch that no problem.

 

Hey guys, I purchased used wheels with tires already mounted, running super stretch, 225/40/19 on a 19x10 front and 245/40/19 on a 19x11 rear, how much psi should I be running??

 

40psi will suffice.

 

If they're coming off a Z they may not actually fit.

What are the offsets front and rear? Tire sizes are fine, but you'll need offsets around +25 front and +40 rear. Where as Zs run +15 +20

 

Im going to be picking up some varrstoen te37 reps 19s +12 all around and running 255/35F and 295/30R, rear fenders are already rolled. Dropping the car on some.bc coils soon with camber kits. Question is will there be rubbing issues??

 

Width?

 

I don't profess to knowing everything about wheel offsets, but I'm running close to your set up. 255/35/19 9.5 +12 fronts, then 295/30 rears 10.5 +22. Tires are michelin ps2's on BC coils, running close to natural camber around -2.5 or so with rear camber arms installed. Rears needed to be rolled, fronts need to remove bolts and depending how low you are the fronts need to be rolled too. I test fitted a 305 tire in the rear and it didn't work, fender work or more camber would've been required. So that should give you an idea for your +12 rears. Hope this helps.

 

Blain, (I cruise the forum a lot so I hope it's not creepy I know your name haha) do you think you could give me some advice on a wheel set up? I am seriously considering picking up a set of wheels, but am only holding back waiting to hear back from a few people on the fender work and modifications required to fit the set up. The rears are 20x12 -4. In an ideal world (being as frugal as possible) I would run a 285/30 that's already available to me. Would it be possible to pull the fenders enough so I wouldn't have to run retarded camber and could run the 285/30's? I'm trying to stay away from ridiculous stretch on the tires because local shops here had trouble even mounting a 255/30 on an 11". Adon's ride has been giving me a pretty good idea of what to expect, and I thought I read he was running a 285/30 or a 275/25. Thanks in advance.