Have a Question/s About Wheels/Tires/Offsets/Camber/Etc? Ask here::
#7396
#7397
Hey guys, my buddy just picked up an '07 V36 sedan and is looking to pick up a set of wheels, but were not sure if the offsets will work for his application.
Can anyone more knowledgeable chime in on whether or not 19x9+35 fronts and 19x10+42 rears would fit on an '07 RWD sedan?
I ran the changes through the 1010tires calculator, front are:
9mm less inner clearance | 29mm outside extension
Rears are:
29mm less inner clearance | 35mm outside extension
Vehicle will have a slight drop, not trying to run retarded amounts of negative camber and stretched tires, in this case function > form
Thanks!
Can anyone more knowledgeable chime in on whether or not 19x9+35 fronts and 19x10+42 rears would fit on an '07 RWD sedan?
I ran the changes through the 1010tires calculator, front are:
9mm less inner clearance | 29mm outside extension
Rears are:
29mm less inner clearance | 35mm outside extension
Vehicle will have a slight drop, not trying to run retarded amounts of negative camber and stretched tires, in this case function > form
Thanks!
#7398
#7400
M45 19s with 5mm spacers on sedan
"I just tried to bolt them up and they hit the upper [sic] control arm [note: it's actually the A Arm]. It's not even close."
I WAS WRONG HERE
CORRECTION: According to the M45 on G35 Sedan Thread HERE:
https://g35driver.com/forums/g35-sed...45-wheels.html
a 5mm spacer will work. 5mm is close. I bought 4 (one for each wheel -- my rationale is that if I am changing the factory specs I might as well do it evenly). I'll update this thread with my results.
I WAS WRONG HERE
CORRECTION: According to the M45 on G35 Sedan Thread HERE:
https://g35driver.com/forums/g35-sed...45-wheels.html
a 5mm spacer will work. 5mm is close. I bought 4 (one for each wheel -- my rationale is that if I am changing the factory specs I might as well do it evenly). I'll update this thread with my results.
M45 19s with 5mm spacers & 245/40 tires on an 2003.5 sedan
There is not even a finger-tip's width of clearance at the upper A arms in the front, but it does clear and the car performs very strong on the set up (note: unintended wheelspin in dry conditions with VDC off has ceased--& as we all know, spinning isn't winning).
Last edited by 03Sedan6MT; 05-07-2017 at 10:15 AM. Reason: update
#7401
Hey guys quick question. I currently have 19x9 +38 19x10 +34 on my Weds Kranze Bazreias. I am looking to relip my current front wheels to a 12" wide wheel and make those my new rears and bring my current rears (the 19x10s) to the front. Will I have clearence issues with the break calipers, etc.? the offset will be +5 (19x12 +5)
#7402
Hey guys quick question. I currently have 19x9 +38 19x10 +34 on my Weds Kranze Bazreias. I am looking to relip my current front wheels to a 12" wide wheel and make those my new rears and bring my current rears (the 19x10s) to the front. Will I have clearence issues with the break calipers, etc.? the offset will be +5 (19x12 +5)
The following users liked this post:
joeslates (02-21-2016)
#7403
Thinking of getting 19x9 with a 35 offset and back wheels being 19x10.5 with 35 offse
They are rays gram lights would these look good on my stock 2004 g35 coupe? What size tires would I have to run. Any help would be appreciated! Thanks maybe in the future I might drop the G but I scrape enough for now.
#7404
Forgestar F14 SDC's
So I am in the market for new wheels and I have found a setup that I am looking into getting. The setup I am going for is based on this beauty of a G35: http://ksportusa.com/kblog/?p=1435
His setup is 19" Forgestar F14 Super Deep Concaves
19x10 -2 and 19x11 -6 wrapped with 225/35/19 and 245/35/19
But I am probably going to get a set of 245/35/19 and 275/35/19 instead for less of a stretch.
I am sitting on stock suspension with non-Brembos, however I do hope to get the AirLift air kit afterwards to avoid the nightmares of scrapping on everything. I am prepared for a fender roll and pull to fit everything, aswell as buying a pair of SPC rear camber arms.
Are there any specs I should change?
His setup is 19" Forgestar F14 Super Deep Concaves
19x10 -2 and 19x11 -6 wrapped with 225/35/19 and 245/35/19
But I am probably going to get a set of 245/35/19 and 275/35/19 instead for less of a stretch.
I am sitting on stock suspension with non-Brembos, however I do hope to get the AirLift air kit afterwards to avoid the nightmares of scrapping on everything. I am prepared for a fender roll and pull to fit everything, aswell as buying a pair of SPC rear camber arms.
Are there any specs I should change?
Last edited by ChunkyMonkey; 02-27-2016 at 09:13 PM.
#7405
So I am in the market for new wheels and I have found a setup that I am looking into getting. The setup I am going for is based on this beauty of a G35: http://ksportusa.com/kblog/?p=1435
His setup is 19" Forgestar F14 Super Deep Concaves
19x10 -2 and 19x11 -6 wrapped with 225/35/19 and 245/35/19
But I am probably going to get a set of 245/35/19 and 275/35/19 instead for less of a stretch.
I am sitting on stock suspension with non-Brembos, however I do hope to get the AirLift air kit afterwards to avoid the nightmares of scrapping on everything. I am prepared for a fender roll and pull to fit everything, aswell as buying a pair of SPC rear camber arms.
Are there any specs I should change?
His setup is 19" Forgestar F14 Super Deep Concaves
19x10 -2 and 19x11 -6 wrapped with 225/35/19 and 245/35/19
But I am probably going to get a set of 245/35/19 and 275/35/19 instead for less of a stretch.
I am sitting on stock suspension with non-Brembos, however I do hope to get the AirLift air kit afterwards to avoid the nightmares of scrapping on everything. I am prepared for a fender roll and pull to fit everything, aswell as buying a pair of SPC rear camber arms.
Are there any specs I should change?
The following users liked this post:
ChunkyMonkey (02-28-2016)
#7406
#7407
#7410