20" Work VSXX Offset Help
#1
20" Work VSXX Offset Help
I am getting ready to buy the 20" Work VSXX's. I have a 2005 G35 Coupe with NO Brembo brakes. Im getting ready to place the order by today or tomorrow. Just need advice on offset. Here is what Im planning:
Front 20" x 9.5 w/ +19mm OFFSET
Rear 20" x 10.5 w/ +17mm OFFSET
I will be rolling the fenders in the rear but I just want to make sure it will clear the calipers.
What do you guys think?
Front 20" x 9.5 w/ +19mm OFFSET
Rear 20" x 10.5 w/ +17mm OFFSET
I will be rolling the fenders in the rear but I just want to make sure it will clear the calipers.
What do you guys think?
Last edited by GSTG35; 03-20-2006 at 12:21 PM. Reason: edit
#3
Originally Posted by badtziscool
Same size all the way around? No staggered setup like 9 in front and 10 in back with 245 and 275?
Sorry about that. its actually staggered.
Front: 20" x 9.5 (+19mm offset)
Rear: 20" x 10.5 (+17mm offset)
2005 G35 Coupe 6MT with NO BREMBO's. I am willing to roll or cut the fenders in the rear.
Any suggestions?
#4
Ok, I ordered my VSXX but with 19x9.5 and 19x10.5, VSXX Offset is a little tricky look at this thread, https://g35driver.com/forums/brakes-suspension/90635-offsets-work-vs-xx-19-a.html when i ordered my wheels, Chris from F1 motorsport told me to get the +32F and +29R to clear my caliper. +29 Offset on a VSXX is not bad, fact is it yield more Lip than a +19 Volk SF winnings. I say call your vendor or Chris and ask him if that offset will clear your caliper since you're getting a 20.
Last edited by FI'ed G; 03-20-2006 at 02:42 PM.
#5
Originally Posted by AthenG
Ok, I ordered my VSXX but with 19x9.5 and 19x10.5, VSXX Offset is a little tricky look at this thread, https://g35driver.com/forums/showthread.php?t=90635 when i ordered my wheels, Chris from F1 motorsport told me to get the +32F and +29R to clear my caliper. +29 Offset on a VSXX is not bad, fact is it yield more Lip than a +19 Volk SF winnings. I say call your vendor or Chris and ask him if that offset will clear your caliper since you're getting a 20.
VSXX
Front: 20 x 9.5 (+19mm)
Rear: 20 x 10.5 (+17mm)
According to the place that I bought them, they said it should fit with minor rolling to the rear fenders. I have a local shop thats going to roll it for $40 each fender. Im just worried that it should clear the calipers and the amount of rolling I need to do for the rears is less than an 1" inch cuz we only have about 3/4" to play with. Its gonna be about 2-3 months, but I had to jump on the deal they gave me.
#6
Originally Posted by GSTG35
Yes, OFFSET is tricky....I just placed an order for:
VSXX
Front: 20 x 9.5 (+19mm)
Rear: 20 x 10.5 (+17mm)
According to the place that I bought them, they said it should fit with minor rolling to the rear fenders. I have a local shop thats going to roll it for $40 each fender. Im just worried that it should clear the calipers and the amount of rolling I need to do for the rears is less than an 1" inch cuz we only have about 3/4" to play with. Its gonna be about 2-3 months, but I had to jump on the deal they gave me.
VSXX
Front: 20 x 9.5 (+19mm)
Rear: 20 x 10.5 (+17mm)
According to the place that I bought them, they said it should fit with minor rolling to the rear fenders. I have a local shop thats going to roll it for $40 each fender. Im just worried that it should clear the calipers and the amount of rolling I need to do for the rears is less than an 1" inch cuz we only have about 3/4" to play with. Its gonna be about 2-3 months, but I had to jump on the deal they gave me.
Ok I just hope they are right, I also had the same deal on other vendor but with +29F and +28R he said it will fit then i spoke to Chris and he said it wont clear the calipers. So i ask the same guy to make sure it will clear my calipers so he email Japan Work to make sure... Guess what, Japan said it wont fit... But if you have confidence go for it, but I will just call Chris to make sure it will fit. Plus even with such a good deal from the other vendor, Chris match it.
Other vendor was selling it for 2400 for set and Chris match the price.. plus you can have a choice for a different color on Rivets (Black or Chrome) for free...
#7
Originally Posted by AthenG
Ok I just hope they are right, I also had the same deal on other vendor but with +29F and +28R he said it will fit then i spoke to Chris and he said it wont clear the calipers. So i ask the same guy to make sure it will clear my calipers so he email Japan Work to make sure... Guess what, Japan said it wont fit... But if you have confidence go for it, but I will just call Chris to make sure it will fit. Plus even with such a good deal from the other vendor, Chris match it.
Other vendor was selling it for 2400 for set and Chris match the price.. plus you can have a choice for a different color on Rivets (Black or Chrome) for free...
Other vendor was selling it for 2400 for set and Chris match the price.. plus you can have a choice for a different color on Rivets (Black or Chrome) for free...
According to the vendor I bought it from, he spoke with the WORK Guys in SoCal and they said I may just need to roll the fenders for the rear.
I went ahead and emailed Work myself to verify the information.
Do you have the factory brakes or are they upgraded?
Thanks for the info, and Ill let you know what happens.
Last edited by GSTG35; 03-20-2006 at 04:14 PM.
Trending Topics
#10
#11
Originally Posted by AthenG
I have OEM on my breaks and i have an 05 6mt Coupe..good thing you're doing your research. It's better be annoying and safe now than sorry later on...
#12
Got some 20" VSXX info
Ok,
I just got off the phone with Jim at Work Wheels and this is what he recommended as far as Offsets for my car:
VSXX Silver
Front: 20" x 9.5 Offset +18mm ~ estimated Lip: 72mm
Rear: 20" x 10.5 Offset +19mm ~ estimated LIP: 90mm
He said as long as my car does not have Brembo's from the factory, These will fit. I can have aftermarket Brembos in the front as long as they are NOT from Nissan or Infiniti because the Brembos from the dealer are wider than the aftermarket ones.
The only thing is I may need to roll the fender in the rears.
So it will be here in about 6 weeks!
Cant Wait!
I just got off the phone with Jim at Work Wheels and this is what he recommended as far as Offsets for my car:
VSXX Silver
Front: 20" x 9.5 Offset +18mm ~ estimated Lip: 72mm
Rear: 20" x 10.5 Offset +19mm ~ estimated LIP: 90mm
He said as long as my car does not have Brembo's from the factory, These will fit. I can have aftermarket Brembos in the front as long as they are NOT from Nissan or Infiniti because the Brembos from the dealer are wider than the aftermarket ones.
The only thing is I may need to roll the fender in the rears.
So it will be here in about 6 weeks!
Cant Wait!
Last edited by GSTG35; 03-21-2006 at 08:59 PM.
#13
#14
Originally Posted by AthenG
I'm doing the calculation:
72mm = 2.8367999999999997inch
90mm = 3.546 inch.
Chris gave me a lip for my 19x9.5 and 19x10.5 with +32F and +29R
8x's = 3 inches
100 = 4 inches
You should be getting more lip with that offset Or maybe my vendor (F1 Motorsports) are lying to me
72mm = 2.8367999999999997inch
90mm = 3.546 inch.
Chris gave me a lip for my 19x9.5 and 19x10.5 with +32F and +29R
8x's = 3 inches
100 = 4 inches
You should be getting more lip with that offset Or maybe my vendor (F1 Motorsports) are lying to me
#15
Heres what Chris at F1 Motorsport said:
I checked the fitment of Work VS-XX 20" You have to different choices.
20x9.5 +31 (2.83" lip)
20x10.5 +25 (3.55" lip)
this fitment, no require any modification fenders.
20x9.5 +18 (3.3")
20x11.0 +19 (4.3")
This fitment, require fenders rolls for the rear.
Chris
I guess we'll find out when it gets here. Then again, I dont even know what dish type Im getting. All I know is Jim @ Work corrected my offsets to +18mm Front / +19mm Rear when the order was placed, and told me the rear fenders will need rolling. Im hoping I get the 3.3 front lip and the 4.3 rear lip. Ill cross my fingers!
I checked the fitment of Work VS-XX 20" You have to different choices.
20x9.5 +31 (2.83" lip)
20x10.5 +25 (3.55" lip)
this fitment, no require any modification fenders.
20x9.5 +18 (3.3")
20x11.0 +19 (4.3")
This fitment, require fenders rolls for the rear.
Chris
I guess we'll find out when it gets here. Then again, I dont even know what dish type Im getting. All I know is Jim @ Work corrected my offsets to +18mm Front / +19mm Rear when the order was placed, and told me the rear fenders will need rolling. Im hoping I get the 3.3 front lip and the 4.3 rear lip. Ill cross my fingers!