THANK YOU FOR THIS DIY!

did this a month ago with my S-Techs.
Cut 3/4" on passanger side and 1/2" on driver.
Came out perfect & very easy to do.

 

does anyone know how tall the spring mount is? not the whole piece... just the top piece that is cut-able.

tia

 

Brand new one is 1inch tall.

 

just need some help figuring this out so my passenger side is a half inch higher than driver how should i go about cutting the spring mount to get more of a drop in the rear and even everything out?

 

is worth doing on coupe

 

R those rear spring mount bolted to the car or is it just pry it loose to remove it?

FYI: the link how to remove the rear spring mount no longer available.

 

They just sit up there on some clips that keep them from sliding around. Once you got the spring out, you just pull the mount down. Well, that's how it is on the sedan.

 

^yeah just pull them down they will come off pretty easily.

 

I have the same problem! I'm wondering if the upper and lower rubber mounts are squished so the lowering springs do not sit correctly.

 

i hope when i do mine its an even drop! hhaha

 

My rear sits pretty uneven. If I take 1/2" to 3/4" off the right side, would it be alright?

 

anyone selling there used rear cut springmount pm me..

 

hey guys i own an 08 g35 sedan with tanabe df210 springs, the drop was pretty much the same in all 4 corners, however, i've recently done some audio work and now im slightly lower in the rear than my front. Can anything be done to drop the front end on the car a bit?

thanks

 

good stuff!

 

i got a extra pair cut already 3/4 holla https://g35driver.com/forums/suspens...mount-mod.html