What happened to the Motordyne Engineering 3/8" plenum spacers?
#136
Originally Posted by jnkirk1974
Ok, so my spacer is officially installed. My verdict:
Immediately off the line, I didn't notice a huge difference. However, once I got into 2nd geat and got up over 3500-4000rpms, the car REALLY comes to life. I really like this mod. It's not neck-breaking performance, but given that it was only around $250, it definitely delivers more than you would expect from a bolt on.
For the money, quality and performance....I'd highly recommend it.
Immediately off the line, I didn't notice a huge difference. However, once I got into 2nd geat and got up over 3500-4000rpms, the car REALLY comes to life. I really like this mod. It's not neck-breaking performance, but given that it was only around $250, it definitely delivers more than you would expect from a bolt on.
For the money, quality and performance....I'd highly recommend it.
I agree, this is a must mod and as far as I'm concerned one of the best bang for your buck!
#137
Originally Posted by OCG35
Congrats jnkirk1974!!! Glad to hear you felt gains! I posted a review when I first got mine and was equally surprised. I don’t understand how there are threads that say bolts-ons provide no gain and are a waste when so many of us have dyno numbers and driving impressions that prove otherwise.
I agree, this is a must mod and as far as I'm concerned one of the best bang for your buck!
I agree, this is a must mod and as far as I'm concerned one of the best bang for your buck!
#138
Originally Posted by cato
Agreed. I think the sway bar and spacer upgrades were my best bang for the buck...and best mods overall. Can't wait for the Iso-Thermal gasket comming soon.
#139
The sway bars are MANDATORY. Particularly if you ever take your car out to the track.
The understeer is disgusting but swaybars fix that real quick.
Oh yeah, I started a thread on MY 350Z. It discusses the details of the new Iso Thermal Plenum spacers.
http://my350z.com/forum/showthread.php?t=142359
Check it out and let me know if you have any questions.
Tony
The understeer is disgusting but swaybars fix that real quick.
Oh yeah, I started a thread on MY 350Z. It discusses the details of the new Iso Thermal Plenum spacers.
http://my350z.com/forum/showthread.php?t=142359
Check it out and let me know if you have any questions.
Tony
#140
#141
Originally Posted by Will_blueprint
man i am glad I was too lazy to do the install this weekend, Will those throttle body heaters work on the G35, also how much are they, so you can get the thermal kit and those?
Yes, the copper TB heater will work on the G35!
The copper TB heater is a stand alone unit that sells for $70, but if you hook up with the GB you can get it for $50.
#142
Iso Thermal !
Phew, i finally did the lower plenum iso thermal gasket this Sunday,
It didn't take me longer than 1.5 hrs..i just had some difficulties removing
the hoses below the TB (since i dun have the right pilers, and i couldn't
find anyone to help me hold the upper plenum while I do those hoses..)
In short, the gasket is of good fit, and everthing worked out great! No
leakage at all !
Anyways, I am looking forward to the Copper coolant bypass mod, and when
is the group buy?
godmans
It didn't take me longer than 1.5 hrs..i just had some difficulties removing
the hoses below the TB (since i dun have the right pilers, and i couldn't
find anyone to help me hold the upper plenum while I do those hoses..)
In short, the gasket is of good fit, and everthing worked out great! No
leakage at all !
Anyways, I am looking forward to the Copper coolant bypass mod, and when
is the group buy?
godmans
Thread
Thread Starter
Forum
Replies
Last Post
Raven7
Engine, Drivetrain & Forced-Induction
0
08-14-2015 04:40 PM