Random Little Question Thread
Oh really....should I take it in even though I don't have that problem? Incase if I do in the future
CCW wheel with less than 100 miles fading.
Not really an option here, no G's in the yards and won't be for some time. We don't have any yards that keep cars newer than 10 years old. I'll keep an eye on part outs.
I was hoping for something similar to Courtesy Nissan, but for the Infiniti, is there such a site I've overlooked?
I was hoping for something similar to Courtesy Nissan, but for the Infiniti, is there such a site I've overlooked?
Not really an option here, no G's in the yards and won't be for some time. We don't have any yards that keep cars newer than 10 years old. I'll keep an eye on part outs.
I was hoping for something similar to Courtesy Nissan, but for the Infiniti, is there such a site I've overlooked?
I was hoping for something similar to Courtesy Nissan, but for the Infiniti, is there such a site I've overlooked?
If I were to get these rims, could I fit them on by just getting the hubcentric rings, or do I need fender work (I'm guessing maybe on the rear?) Thanks
VMR V710
Front 19 x 8.5 ET 35
Rear 19 x 9.5 ET 22
http://www.modbargains.com/VMR-V710-...n-Infiniti.htm
VMR V710
Front 19 x 8.5 ET 35
Rear 19 x 9.5 ET 22
http://www.modbargains.com/VMR-V710-...n-Infiniti.htm
Stap it, wheel wax. It's an anodized finish it's basically raw metal with a stain. It's going to fade if it's not protected. Same deal when I had mine, gotta maintain the **** out of an anodized finish.
On another note, anybody know what offset options were available on the 18x8.5 and 18x9.5 LMGT4s? Were they all +25?
On another note, anybody know what offset options were available on the 18x8.5 and 18x9.5 LMGT4s? Were they all +25?
Registered User
iTrader: (18)
Joined: Sep 2007
Posts: 10,359
Likes: 1,941
From: Auckland, New Zealand
Stap it, wheel wax. It's an anodized finish it's basically raw metal with a stain. It's going to fade if it's not protected. Same deal when I had mine, gotta maintain the **** out of an anodized finish.
On another note, anybody know what offset options were available on the 18x8.5 and 18x9.5 LMGT4s? Were they all +25?
On another note, anybody know what offset options were available on the 18x8.5 and 18x9.5 LMGT4s? Were they all +25?
I still find it weird that this all happened with the car barely sitting in the sun, and only one wheel.
^These can be had at pretty much any local parts store, they're pretty generic.
If you've got it just cut the harness off and bring it in with you. Per the specific part number i can probably dig that up fromt he FSM later on today if you need it specifically. All I can say now for sure is the bulb is a T10 wedge size, or "194"
If you've got it just cut the harness off and bring it in with you. Per the specific part number i can probably dig that up fromt he FSM later on today if you need it specifically. All I can say now for sure is the bulb is a T10 wedge size, or "194"
I need the actual connectors. Both the one that twists in to the sidemarker and the one that is hard wired to the car.