Random Little Question Thread
#6678
splash guards
Ive been looking for some splash guards, front and rear, and im not having any luck. I found some on ebay but im always leary of how things will fit coming from ebay. Also im looking for some already painted, just ready to install. Im DG and would like to buy them all together from the same company or person. Any ideas on where to find some?
#6679
Or wire in a bypass for the G sensor module. There's write ups here and over on my350Z.com
#6680
Really? I always found I could get the tires loose without that, will this help make the wheels spin faster when doing a burnout though? I found they dont spin extremely fast when doing a standing burnout
#6684
BUT if you're trying to do a real burn out, not just a brief spin and release, it will surge the brakes to the spinning wheels even with VDC off.
Same goes for a donut, at the point you hit just over 360* of spinning it grabs briefly and messes the 'circle' of the donut up.
Pull the fuse and you can actually spin constantly.
The VDC off is pretty lenient in our cars, unless you're really messing around you shouldn't need ot pull the fuse/disable the G sensor.
#6685
Normally you cannot do this. You can spin tires, and you can do some pretty large fishtales.
BUT if you're trying to do a real burn out, not just a brief spin and release, it will surge the brakes to the spinning wheels even with VDC off.
Same goes for a donut, at the point you hit just over 360* of spinning it grabs briefly and messes the 'circle' of the donut up.
Pull the fuse and you can actually spin constantly.
The VDC off is pretty lenient in our cars, unless you're really messing around you shouldn't need ot pull the fuse/disable the G sensor.
BUT if you're trying to do a real burn out, not just a brief spin and release, it will surge the brakes to the spinning wheels even with VDC off.
Same goes for a donut, at the point you hit just over 360* of spinning it grabs briefly and messes the 'circle' of the donut up.
Pull the fuse and you can actually spin constantly.
The VDC off is pretty lenient in our cars, unless you're really messing around you shouldn't need ot pull the fuse/disable the G sensor.
It was after I got an Osiris tune, not sure if they touched anything. But I had no issues doing burnouts or donuts when I was wasting my old tires.
Also with the sensor out I don't think it will interfere at all.
With just VDC off , I don't recommend doing this, my Diff died 2 months later no idea if it was from this. Possibly was
Last edited by thescreensavers; 07-12-2012 at 06:35 PM.
#6688
The following users liked this post:
TunerMax (07-13-2012)
#6690
$1k in decent shape with like-new pads and rotors is decent, but $1k needing paint, or without good pads/rotors is too much.
Just my opinion, seems like people pay it, so dunno. But these are brakes that are 08-10 years old now. I think it's kind of silly to spend that kind of coin on them. Again, Just MY opinion on it.