Random Little Question Thread
#8101
The following users liked this post:
canehdian_guy (01-04-2013)
#8102
I posted this in another thread but In case no one views it. I will post it here as well.
when I start my car, it warms up a bit. about 25% on the gauge then I take off.
I approach the stop sign down the block and I proceed to go and for a split second it's like the engine or transmission lag and are not responsive to the gas pedal, so I push the gas pedal down a tiny but more then the car jerks real nasty like if it finally ricieves input from the ecu and jams into gear.
it's not a huge lag like 3-4 sec. I'd say 1 sec lag then the jerk.
I do t think it's downshifting because 1. I'm going 3 mph & 2. I'm not flooring it and since its in first gear because I'm going 3 mph, it can't downshift into 0 gear!
I've seen online people say trans fluid could be it. it's AT.
has anyone had this issue and resolved it?
when I start my car, it warms up a bit. about 25% on the gauge then I take off.
I approach the stop sign down the block and I proceed to go and for a split second it's like the engine or transmission lag and are not responsive to the gas pedal, so I push the gas pedal down a tiny but more then the car jerks real nasty like if it finally ricieves input from the ecu and jams into gear.
it's not a huge lag like 3-4 sec. I'd say 1 sec lag then the jerk.
I do t think it's downshifting because 1. I'm going 3 mph & 2. I'm not flooring it and since its in first gear because I'm going 3 mph, it can't downshift into 0 gear!
I've seen online people say trans fluid could be it. it's AT.
has anyone had this issue and resolved it?
#8103
I posted this in another thread but In case no one views it. I will post it here as well.
when I start my car, it warms up a bit. about 25% on the gauge then I take off.
I approach the stop sign down the block and I proceed to go and for a split second it's like the engine or transmission lag and are not responsive to the gas pedal, so I push the gas pedal down a tiny but more then the car jerks real nasty like if it finally ricieves input from the ecu and jams into gear.
it's not a huge lag like 3-4 sec. I'd say 1 sec lag then the jerk.
I do t think it's downshifting because 1. I'm going 3 mph & 2. I'm not flooring it and since its in first gear because I'm going 3 mph, it can't downshift into 0 gear!
I've seen online people say trans fluid could be it. it's AT.
has anyone had this issue and resolved it?
when I start my car, it warms up a bit. about 25% on the gauge then I take off.
I approach the stop sign down the block and I proceed to go and for a split second it's like the engine or transmission lag and are not responsive to the gas pedal, so I push the gas pedal down a tiny but more then the car jerks real nasty like if it finally ricieves input from the ecu and jams into gear.
it's not a huge lag like 3-4 sec. I'd say 1 sec lag then the jerk.
I do t think it's downshifting because 1. I'm going 3 mph & 2. I'm not flooring it and since its in first gear because I'm going 3 mph, it can't downshift into 0 gear!
I've seen online people say trans fluid could be it. it's AT.
has anyone had this issue and resolved it?
The following users liked this post:
TunerMax (01-04-2013)
#8105
#8106
I drove ttrank's car solo
iTrader: (50)
Join Date: Mar 2009
Location: By the sea, Tx
Posts: 18,299
Received 1,486 Likes
on
1,221 Posts
G35 sedan w/ too much money in mods
The following users liked this post:
TunerMax (01-04-2013)
#8107
#8112
That is what i thought. I was doing some led work and when i tested it with my power supply all leds would work. Once i put them on the car, turn on the parking light they would work. Then i turn on the low beam one led would go out. then from there on it would switch on and off between leds. Total leds per headlight is 4.
Since that idea didnt go so well, im going a different route. Something different.
Since that idea didnt go so well, im going a different route. Something different.
#8113
#8114
I have the 5/16 spacer, and I just got some new polished bolts for the upper plenum, can I just take the 6 bolts out of the center portion of the upper plenum without the plastic pieces inside moving out of place on me? Or should I stop being lazy and take off the upper plenum and then put them on. Asking bc it's cold as hell here and I'm trying to make this a quick project, and possibly save myself 30 min of standing out in this weather. Thanks dudes!