Nissan Power Pup Bullydog - First Impressions
#558
I let the car warm up about 15 minutes and still nothing. I drove the cr around town, then tried it again and nothing. It seems that it can't read the temperature because the power pup maintains the temperature screen always at 0 degrees. I'm going to call Bullydog and see if I need to download another version. Anyways, the rest of the tune is fine and feels great. Its cool to watch the rpm limiter at 8K, haha.
#559
#560
Don't just throw any tune in and hope for the best.
Let Bullydog get your specific # from the ECU and let them tell you which version is for you.
I hated waiting almost 2 weeks for my tune, but the wait was SO worth it.
#561
#563
These are minor tweaks to allow the car to accept the tune.
There are no performance based differences between these versions
#564
Crap, the blown engine posts are freaking me out - my #1 rule for the G is it has to start every time I push the button, even limited risk isn't worth it for a few additional HP. Went back to the standard tune, and just stuck with +2 timing (plus removing the speed limiter, and keeping the 7,800 rpm redline )
I know it's a really small sample that have had problems, am probably being overcautious.
I know it's a really small sample that have had problems, am probably being overcautious.
#565
#566
#567
Going completely back to stock means you reset ALL 3: 1. the fuel-specific tune 2. rev limiter 3. speed limiter.
Degree timing and idle timing are separate options.
If you want to be stock, but without speed limiter, re-run BD PP and leave item #1 @ the standard tune, leave item #2 untouched and change item #3 to something too fast... so its basically like stock, but without speed limiter.
Degree timing and idle timing are separate options.
If you want to be stock, but without speed limiter, re-run BD PP and leave item #1 @ the standard tune, leave item #2 untouched and change item #3 to something too fast... so its basically like stock, but without speed limiter.
#570
G35now: how do you go back to stock yet leave the speed limiter off ? I went stock today, and after that the only thing I could change was Timing I believe. I want it to be completely stock + 2 degree advance timing + speed limiter removed. I have the first 2 accomplished.
Thanks!
Thanks!
P.S. It's great that the speed limiter's gone - I don't expect to ever get anywhere near max speed...but now I could...