I am currently working on this now. It is not an easy task, once i get it down perfect i will take orders. Gonna try and post a video DIY for you guys too.

 

I did this on my 04 G35. It was actually very simple.

 

^^^ Got pics?

 

I have a remote that im planning to sell if anyone is interested...I shaved the inside for the board to fit flush...pm me if you want pics of it.

 

Do we really need the uncut key that comes with the Smart key fob? since we only need the casing.

 

No you dont actually need to key part, but that part also has the little hook for a keychain, and if you wanted to you can have that piece cut and use it as your actual key.

 

I just did this today and it worked out gret. The only things were that my circuit board and button liner were different, but I was able to make the circuit board to worka nd just needed to make some extenders for the buttons.

 

If anyone needs one of these i have one that i bought on accident for my 03 and dont really feel like doing this mod to make it work. It has a brand new uncut key insert. PM me.

 

Hi ,

I just read the thread on replacing the Key fob and i have a question about soldering. When you soldered the copper wires to the switch board, did you only solder one side of the copper wire inside the holes mentioned or both (in the hole and on the board).

And will this one work for the MOD< im going with the whole JDM thing so i want a Nissan one

FCC ID: KR55WK48903 IC: 267T-5WK48903
http://cgi.ebay.com/ebaymotors/2006-...item1c16b0547b

or
CWTWBU735
http://cgi.ebay.com/ebaymotors/NISSA...item255e8a9284

 

wow sick!!!

 

BUMP , someone answer this please !

Hi ,

I just read the thread on replacing the Key fob and i have a question about soldering. When you soldered the copper wires to the switch board, did you only solder one side of the copper wire inside the holes mentioned or both (in the hole and on the board).

And will this one work for the MOD< im going with the whole JDM thing so i want a Nissan one

FCC ID: KR55WK48903 IC: 267T-5WK48903
http://cgi.ebay.com/ebaymotors/2006-...item1c16b0547b

or
CWTWBU735
http://cgi.ebay.com/ebaymotors/NISSA...item255e8a9284

 

just finished mine up and honestly i didnt solder anything but the metal battery holder

 

i broke the piece that the key ring goes on so i need to do this anyone have an extra upgraded key fob they can sell me? pm me if not ill just do this also

 

glad i found this thread!

 

I still get a lot of PM's from people asking me if I still do this mod... YES I do.. PM me if you are interested. I have done this for quite a few members on here. Some of them left me an iTrader rating.

You MUST provide me with the new FOB and your old remote. I have a set price which includes, the labor, paypal fees and return shipping VIA USPS. I also fully test the units before shipping them out.