Wrathernaut's Double-Din Installation FAQ, Shopping and Resource List
#702
Registered User
iTrader: (15)
Make sure you put a towel over the shifter trim, that way you can lay the head unit console onto it when plugging everything in. Everything fit fine, definitely enough room. You don't want to have wires or plugs above the the plastic/metal bracket (seen where the antenna adapter hangs off in the picture above) and all the way to the plastic wall. There was actually a lot more room than I thought there would be once I put everything in the lower left.
The following users liked this post:
CROYCE992 (05-11-2016)
#704
Registered User
iTrader: (15)
JDM
My Pioneer 4300 mounts into the dash kit with a 1/4" gap at the top and sticks out about 3/8" from the face of the dash kit. Doesn't look as good as I wanted it to look, but I'm not going to complain..
Still can't figure out how to dim the brightness...it's so bright at night!!!!!!!!!
My Pioneer 4300 mounts into the dash kit with a 1/4" gap at the top and sticks out about 3/8" from the face of the dash kit. Doesn't look as good as I wanted it to look, but I'm not going to complain..
Still can't figure out how to dim the brightness...it's so bright at night!!!!!!!!!