Random Little Question Thread
#6106
jgitt, it's possible that the complaints you read about were due to user error... upon cleaning it/re-oiling it, some people don't read the directions and either put too much or don't allow enough drying time.
I use Apexi's "power intake" drop-in dry filter. Bought it off Concept Z Performance for 27 bucks, works for me.
I use Apexi's "power intake" drop-in dry filter. Bought it off Concept Z Performance for 27 bucks, works for me.
#6107
Well, my opinion is biased because I had no desire in buying an oiled filter. Before settling with the Apexi, I explored the NAPA gold air filter, Amosoil, and the HKS air filter. My Apexi does the trick, no complaints at all and compliments the ztube + power duct removed. At the end of the day it's just an air filter lol, nothing significant will result from whichever one you choose, any, should flow a lil better than the oem paper. Check out the link below at your own discretion.
^ +1
http://www.mkiv.com/techarticles/filters_test/2/
The NAPA filter is paper... While the NAPA filters better than most other filters, flow is not as good. K&N and Amsoil are really similar enough that there won't be any noticeable difference.
http://www.mkiv.com/techarticles/filters_test/2/
The NAPA filter is paper... While the NAPA filters better than most other filters, flow is not as good. K&N and Amsoil are really similar enough that there won't be any noticeable difference.
Last edited by mpugeda; 04-12-2012 at 10:00 AM.
The following users liked this post:
jgitt (04-09-2012)
#6108
3.5 vs 3.3 Enjoy
Youtube Doubler
not really clean shifts but w/e lol. Refresh the page sometimes they are lined up pretty good, just need to get them to start properly
Youtube Doubler
not really clean shifts but w/e lol. Refresh the page sometimes they are lined up pretty good, just need to get them to start properly
#6109
Hey guys something weird happened to me today, when i came out of work my car wouldnt turn on it was crancking but wouldnt turn over, and my dome light was coming on and off, then i tried moving the the gears from P to D and back to P and the car finally turned on any ideas what this could be i dont have any lights on.
#6110
Hey guys something weird happened to me today, when i came out of work my car wouldnt turn on it was crancking but wouldnt turn over, and my dome light was coming on and off, then i tried moving the the gears from P to D and back to P and the car finally turned on any ideas what this could be i dont have any lights on.
#6111
#6113
Alternatively, you can first click through one of the emails you received, scroll all the way to the bottom and click the link that appears under this line:
"To unsubscribe from ALL threads, please visit this page:
[click this link here in your email]"
Then adjust your subscription options.
Last edited by calcul8; 04-12-2012 at 12:59 AM.
The following users liked this post:
TxPwnBoy (04-11-2012)
#6115
Registered User
iTrader: (18)
Join Date: Sep 2007
Location: Auckland, New Zealand
Posts: 10,359
Received 1,939 Likes
on
1,249 Posts
#6117
#6119
#6120
Are you getting emails from members or as a result of post replies? If it's the former, then I dunno. If it's the latter, then you need to turn off your thread subscription settings by going into UserCP --> Edit Options --> choose "Do not subscribe" or "No email notification" from the dropdown menu under "Default Thread Subscription Mode".
Alternatively, you can first click through one of the emails you received, scroll all the way to the bottom and use the click the link that appears under this line:
"To unsubscribe from ALL threads, please visit this page:
[click this link here in your email]"
Then adjust your subscription options.
Alternatively, you can first click through one of the emails you received, scroll all the way to the bottom and use the click the link that appears under this line:
"To unsubscribe from ALL threads, please visit this page:
[click this link here in your email]"
Then adjust your subscription options.