Wrathernaut's Double-Din Installation FAQ, Shopping and Resource List
#782
#786
#787
#790
They introduced bluetooth into the PAC SWI - series of units a couple of years ago, so it's unlikely to find them without bluetooth unless you're buying from a local shop that has them covered in dust. Still, there's no reason to use the SWI- series over the Axxess unless you have a unit that accepts voice commands like the Z110, Z120, Z130 or Z140 units. The Axxess is an easier install and the same price, and they all support bluetooth functions.
#792
Why do I need the PAC ROEM-NIS2 to keep my Bose amplifier? Can't I use the 70-7551 or 70-7550?
Most people do not get full volume sound with the 70-7551, and end up with high noise levels with the 70-7550. In cases where this has happened, the more expensive PAC ROEM-NIS2 has proven to completely fix the problem. I have had good luck with the 70-7551, but I cannot guarantee you will have the same results. If you wish to try your luck, here's my installation using only the 70-7551:
srry ii read this .. dam =/
Most people do not get full volume sound with the 70-7551, and end up with high noise levels with the 70-7550. In cases where this has happened, the more expensive PAC ROEM-NIS2 has proven to completely fix the problem. I have had good luck with the 70-7551, but I cannot guarantee you will have the same results. If you wish to try your luck, here's my installation using only the 70-7551:
srry ii read this .. dam =/
#794
They introduced bluetooth into the PAC SWI - series of units a couple of years ago, so it's unlikely to find them without bluetooth unless you're buying from a local shop that has them covered in dust. Still, there's no reason to use the SWI- series over the Axxess unless you have a unit that accepts voice commands like the Z110, Z120, Z130 or Z140 units. The Axxess is an easier install and the same price, and they all support bluetooth functions.
#795
PAC SWI question, I know it has been asked 100 time lol at least but. For the PAC SWI i just need the 4 main wires(red 12v,black ground, white/green, and grey/red) and the 3.5mm jack to hook it up. I will be putting a parking brake bypass on as well. I want to de-pin the rest so I have less of a mess.
Thanks guys almost ready for my install
Thanks guys almost ready for my install
![Smilie](https://g35driver.com/forums/images/smilies/smile.gif)